Certificate of Analysis

COA library

Testing in progress

This batch is with the laboratory for identity and purity testing. Its certificate is published here as soon as the results are reported.

GLOW

Original price was: $90.00.Current price is: $59.99.

GLOW is a co-lyophilized research blend supplied as a lyophilized powder, 70 mg per vial (GHK-Cu 50 mg, BPC-157 10 mg, TB-500 10 mg), for laboratory research.

  • Lot numbered vial for traceability
  • Certificates published per lot in the COA Library
  • Research use only. Not for human or veterinary use
  • Research use only Not for human or veterinary use
  • Certificate per lot Published against the lot number
  • Independently tested HPLC purity, mass spec identity
  • Restricted sale 18+ qualified researchers only

Certificate of Analysis

COA library

Testing in progress

This batch is with the laboratory for identity and purity testing. Its certificate is published here as soon as the results are reported.

What is GLOW?

GLOW is a co-lyophilized blend of three synthetic peptides supplied in one vial for laboratory research: the copper tripeptide GHK-Cu, the pentadecapeptide BPC-157 and the heptapeptide TB-500. Each 70 mg vial holds 50 mg GHK-Cu, 10 mg BPC-157 and 10 mg TB-500.

GLOW composition

The three components are chemically distinct. GHK-Cu is a copper(II) complex of the tripeptide Gly-His-Lys (401.91 Da). BPC-157 is a linear 15 residue peptide rich in proline (1419.54 Da). TB-500 is the acetylated heptapeptide Ac-LKKTETQ (889.01 Da), corresponding to residues 17 to 23 of thymosin beta-4. The bound copper gives the powder its blue color, and the very different masses let each component be identified separately by mass spectrometry.

Where this material appears in the literature

There is no published literature on this specific combination. Each component appears separately: GHK-Cu in cultured fibroblast studies of extracellular matrix synthesis, BPC-157 in rodent gastrointestinal and soft tissue models, and TB-500 in actin binding and analytical detection work. Kynvell BioLabs supplies the material for that kind of laboratory investigation and makes no claim about what it does in any living subject.

Related material in the catalog

GLOW is held under blend research. KLOW adds KPV to the same three components, and GHK-Cu and BPC-157 are offered on their own.

Analysis and certification

Kynvell BioLabs publishes certificates of analysis against lot numbers in the COA Library, with purity determined by HPLC and identity confirmed by mass spectrometry. A certificate for the current lot of GLOW is not yet published there. Check the COA Library for the lot number printed on your vial, or contact us before using the material.

For a blend, the certificate identifies each component separately by mass and reports purity for the vial contents as tested.

Purity and the certificate

Purity is determined by HPLC peak area and reported for each lot on its certificate of analysis. The measured figure belongs to the lot it is published against, not to the product as a whole, which is why the lot number on the vial matters.

Where a figure on this page and a certificate differ, the certificate is the record that applies to your material. Analytical figures carry no implication of suitability for any purpose beyond laboratory research.

Research use only

Kynvell BioLabs supplies this material as a reference material for laboratory research. It is not supplied for any use in humans or animals, it is not a drug, dietary supplement, food or cosmetic, it has not been evaluated by the U.S. Food and Drug Administration, and nothing on this page describes or implies any such use. Sale is restricted to persons aged 18 or over who are qualified researchers or who purchase on behalf of a research institution, laboratory or business.

Choose Size

70 mg

Compound GLOW
Also known as GHK-Cu / BPC-157 / TB-500 blend
Class Co-lyophilized blend of three synthetic peptides
Components per vial GHK-Cu 50 mg, BPC-157 10 mg, TB-500 10 mg
GHK-Cu Gly-His-Lys copper(II) complex, C14H22CuN6O4, 401.91 Da
BPC-157 15 residues, C62H98N16O22, 1419.54 Da
TB-500 Ac-Leu-Lys-Lys-Thr-Glu-Thr-Gln, C38H68N10O14, 889.01 Da
Appearance Blue to blue violet lyophilized powder (color from the copper peptide)
Purity Measured per lot, stated on the certificate of analysis
Purity method HPLC
Identity method Mass spectrometry
Solubility Soluble in sterile water for analytical preparation
Labeled quantity 70 mg per vial

Characterization. Values above describe the components as supplied. Component amounts are the labeled fill per vial. The figures for the lot you receive are stated on its certificate of analysis.

How this material is tested

Two separate analyses are carried out on a lot before its certificate is published, and both appear on the certificate.

  • HPLC, for purity. High performance liquid chromatography separates the material into its components. The main peak is integrated against total peak area, and that ratio is the purity figure reported on the certificate.
  • Mass spectrometry, for identity. Mass spectrometry confirms that the mass of the main component matches the expected mass for the compound, which is what distinguishes the correct sequence from a closely related one.

A complete certificate carries the compound name, the lot number, the test date, the method, the measured purity and the name of the laboratory. If any of those is missing, or the lot number on the vial does not match the certificate, contact us before using the material.

Storing GLOW

Move the sealed vial into freezer storage on arrival. Store it dry at −20°C or below, protected from light and moisture. Returned promptly to those conditions, the dry solid is the most stable form this material takes. Copper peptide solutions are light sensitive, so keep prepared solutions in amber or foil wrapped tubes.

Preparing stock solutions

Prepare stock solutions in sterile water at a concentration suited to your assay, expressed in mg/mL. Allow the vial to reach room temperature before opening, add solvent down the vial wall rather than directly onto the solid, and let the material dissolve without vigorous agitation. Solvent guidance for this material: soluble in sterile water for analytical preparation.

Solutions are less stable than the dry solid. Prepare close to the point of use, hold at 2 to 8°C for short periods only, and aliquot before freezing so that repeated freeze and thaw cycles are avoided.

The components of a blend are dissolved together. Prepare the whole vial contents in one solution rather than weighing out part of the powder, because the components are not guaranteed to be evenly distributed through a partial portion.

On arrival

Check that the vial is intact and sealed, that the compound name and labeled quantity match your order, and that the lot number on the label matches the certificate published for it in the COA Library. If anything does not match, or the packaging has clearly failed in transit, contact us before using the material and report it as soon as possible after delivery.

Handling and disposal

Assess the hazards of this material before handling it and use appropriate controls and protective equipment. It has not been fully characterized toxicologically and should be treated as potentially hazardous. Anyone handling it should be trained for the work.

Dispose of unused material, vials and packaging lawfully and in line with your institution's waste procedures.

Record keeping

Record the lot number in your notes at the point of first use, alongside the date the vial was opened and the concentration of any stock prepared. Certificates are published against the lot number rather than the product, so the lot number is the only reliable link between your results and the analytical data for the material that produced them. If a question arises about a result months later, that link is what keeps the work auditable.

Is there a certificate of analysis for GLOW?

Certificates are published in the COA Library against lot numbers. A certificate for the current lot of GLOW is not yet published there. Check the library for the lot number on your vial, or contact us before using the material.

What purity is GLOW supplied at?

Purity is measured by HPLC for each lot and stated on that lot's certificate of analysis. The certificate, not the product page, is the record that applies to the material you receive.

What does each vial of GLOW contain?

Each 70 mg vial holds GHK-Cu 50 mg, BPC-157 10 mg, TB-500 10 mg, co-lyophilized as a single powder. The certificate identifies each component separately by mass spectrometry.

How should GLOW be stored?

Store the sealed vial dry at −20°C or below, protected from light and moisture, and move it into freezer storage on arrival. Solutions are less stable than the dry solid: prepare close to use, hold at 2 to 8°C briefly, and aliquot before freezing.

What solvent is used for analytical preparation?

Soluble in sterile water for analytical preparation. Allow the vial to reach room temperature before opening and add solvent down the vial wall. Concentrations are expressed in mg/mL to suit your assay.

Can GLOW be used in humans or animals?

No. It is supplied for laboratory research use only. It is not a drug, dietary supplement, food or cosmetic, it is not for human or veterinary use, and sale is restricted to qualified researchers aged 18 or over.

Looking for something else?

Tell us the compound and quantity you are looking for and we will confirm availability and lead time. Research use only.

Contact Us

Why Kynvell

Research material you can match back to its lot

Reproducible work starts with material you can trace. Every lot is tested, certified and labeled so the vial on your bench links straight back to its analytical record.
Related research material

Also in the catalog

Peptide Research

KPV

$35.99
This product has multiple variants. The options may be chosen on the product page
Sale!

Metabolic Research

Tesamorelin

Price range: $59.99 through $99.99
This product has multiple variants. The options may be chosen on the product page

Featured Research

AquaVell

$14.99
This product has multiple variants. The options may be chosen on the product page

Peptide Research

MOTS-C

$45.99
This product has multiple variants. The options may be chosen on the product page
Sale!
Original price was: $150.00.Current price is: $98.00.
This product has multiple variants. The options may be chosen on the product page

Featured Research

NAD+

$59.99
This product has multiple variants. The options may be chosen on the product page

Metabolic Research

KB-2 TZ

$55.99
This product has multiple variants. The options may be chosen on the product page

Featured Research

KB-3 RT

Price range: $55.00 through $115.00
This product has multiple variants. The options may be chosen on the product page

Stay informed

Restock alerts and new lot releases

Be first to know when a sold out lot returns and when new research material is added to the catalog.


We use your address for restock notices only. Unsubscribe in one click. See our privacy policy.

In stock now

Most ordered

Featured Research

AquaVell

$14.99
This product has multiple variants. The options may be chosen on the product page

Featured Research

KB-3 RT

Price range: $55.00 through $115.00
This product has multiple variants. The options may be chosen on the product page
Sale!
Original price was: $150.00.Current price is: $98.00.
This product has multiple variants. The options may be chosen on the product page
Sale!

Metabolic Research

Tesamorelin

Price range: $59.99 through $99.99
This product has multiple variants. The options may be chosen on the product page

Featured Research

NAD+

$59.99
This product has multiple variants. The options may be chosen on the product page

Cosmetic Research

GHK-Cu

Price range: $35.00 through $50.00
This product has multiple variants. The options may be chosen on the product page
Sale!

Peptide Research

SS-31

Original price was: $57.89.Current price is: $49.99.
This product has multiple variants. The options may be chosen on the product page

Blend Research

KLOW

$139.99
This product has multiple variants. The options may be chosen on the product page

Research use only

All products listed on this website are supplied for laboratory research use only. They are not drugs, biologics, dietary supplements, foods or cosmetics, they have not been approved or evaluated by the U.S. Food and Drug Administration, and they are not intended to diagnose, treat, cure or prevent any disease. They are not for human or veterinary consumption, diagnostic or therapeutic use. Nothing on this website is an offer to supply to the general public. Sale is restricted to persons aged 18 or over who are qualified researchers or who purchase on behalf of a research institution, laboratory or business. Buyers are solely responsible for handling, storage, disposal and for compliance with all federal, state and local laws that apply to their own work.